What happens if at powering on, the socket does not start?
- Check if the fan inside the socket is running.
- Make sure the form selector switch is set according to the meter base being used and also verify that the tabs, if needed, are inserted in the proper position. The User Guide provided with the unit contains an appendix with the different meter form configuration.
- Verify that the voltage of the meter base is between 100 and 480VAC. The meter base must be able to provide at least 150VA.
- Make sure that the circuit breakers are not tripped by pressing them to reset.
Useful links:
MT-1/WT3
MT-1/WT1
Related Articles
When the memory is full does it start overwriting the old tests automatically or does it notifies the user that the memory is full before starting to overwrite?
The test data is never overwritten when the socket runs out of storage. The socket will generate an error and will indicate the user that he need to export test data to a PC. When the user is to save the 101th test, it will display a message saying: ...Will testing the meter cause a power interruption? (WT Series)
The customer has power back for the duration of the test thanks to our internal bypasses The only outage the customer experience is when removing the meter to inster the tester and when removing the tester to put the meter back in the installation. ...Will testing the meter cause a power interruption? (NT Series)
The customer has power back for the duration of the test thanks to our internal bypasses The only outage the customer experience is when removing the meter to insert the tester and when removing the tester to put the meter back in the installation. ...Can it generate graphs from the readings? Which ones?
The results are expressed in table format and graphical format, those will be integrated into the PDF. All the information from the Power quality and burden test have graphics that are displayed in real time to enable an live assessment on the ...How many test reports does the unit store internally?
The XT Series tester’s embedded non-volatile memory can hold up to 8 MB of test report data. As a rule of thumb, the memory should hold around 1000 test reports. A test record is created when the operator opts to save the data of a completed test. ...