What is the Custom test?
How does it work?The Custom test is used to test a specific combination of load and active phase.Once the test is completed, the user can save the test data in the device memory.
To execute a Custom test, an optical pickup or a Metercam must be installed on the WT series tester.Useful links:
MT-1/WT3
MT-1/WT1
Related Articles
What is the Quick test?
Quick test What is the Quick test? The Quick test can be used to quickly assess the accuracy of a meter. How does it work? The Quick test runs a predetermined sequence of sub-tests, all in one operation, during which all phases are energized ...What is Demand test?
Demand test Ho does it work? The Demand test is used to test meters that have a demand register, (no accessories are needed). The meter must first be configured to be in kW demand test mode (check meter manual for device specific procedure). The ...Pulse Pickup shielding v1.6+
What is a Pulse Pickup? A Pulse Pickup is a device used to detect electronic output pulses based on the Watthour constant (Kh) of your electricity meter. These pulses can be visible or infrared light. Under normal operating circumstances in various ...What is the Full test?
Full Test How does it work? The Full test is used to fully assess the quality of a meter, as it runs a complete sequence of sub-tests. The Full test runs an equivalent of the Quick Test followed by additional single-element tests. To execute a Full ...What is Four Quadrant test (4 Quad Test)?
What is a Four Quadrant test? The Four Quadrant test is an automatic test sequence that can be used to assess the meter’s ability to register energy in all four quadrants of the power vector diagram. The Four Quadrant Test runs an equivalent of the ...