What is the procedure when installing the tester?

What is the procedure when installing the tester?





The ST-3/XT3 is compatible with CT rated installations forms 3S, 4S, 6S, 8S and 9S, it is also compatible with installation forms 5S, 35S and 45S using the included adapter.
  1. Before testing a CT rated installation in the field, always make sure that the electrical wiring of the meter base is fully compatible with those shown in User Guide, Appendix B.
  2. The ST-3/XT3 must first be configured to the meter base in accordance with User Guide, Appendix C.
  3. Then remove the meter from the meter base as per company procedure and insert the ST-3/XT3 in the meter socket by aligning the jaws of the meter base to the tabs of the ST-3/XT3.


ST-3/XT3
Product page: https://probewell.com/solutions/portable-wireless-site-testers/st3-xt3/
Spec Sheet: Download PDF
Manuel: Download PDF
Connection Guideline: Download PDF

Introduction Video: Watch Tutorial
ST-3/XT3 Overview: Watch Overview

    • Related Articles

    • How does the ST-3/XT3 works?

      ST-3/XT3 : Transformer Rated Wireless Site Tester This unit is a socket type tester, that obtains the reading directly from the secondary of the current and potential transformers. It does not require any external load to perform tests and it is ...

    • Can I use it whitout accessories? How many accessories can I use with?

      Yes, it can work without any accessories, depending on the test you wish to perform on the site. The only test that it is not available without accessories would be the primary/secondary analysis (Ratio Test).   The accessories available are 3 phases ...

    • Will there be a power interruption for the customer while testing the meter?

      The customer has power back for the duration of the test thanks to our internal bypasses.The only outage the customer experience is when removing the meter to insert the tester and when removing the tester to put the meter back in the installation. ...

    • Can I use in on a 5S installations?

      Yes. In order to use the ST-3/XT3 on a 5S, 35S or 45S installation, you must use the 5S, 35S and 45S adapter which is included when you purchase a ST-3/XT3. Useful links: Product ...

    • What is the Secondary Burden test?

       Secondary Burden test  What is the Secondary Burden test? The Secondary Burden test is used to analyze the effect of a resistive burden on the behaviour of the CT. Within the ST-3/XT3 is an array of high accuracy resistors that can be, with the use ...